Specifications

2-93

Cisco ME 3400 Ethernet Access Switch Command Reference

OL-9640-07

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

errdisable detect cause small-frame

Use the errdisable detect cause small-frame global configuration command to allow any switch port

to be error disabled if incoming VLAN-tagged packets are small frames (67 bytes or less) and arrive at

the minimum configured rate (the threshold). Use the no form of this command to return to the default

setting.

errdisable detect cause small-frame

no errdisable detect cause small-frame

Syntax Description This command has no arguments or keywords.

Defaults This feature is disabled.

Command Modes Global configuration

Command History

Usage Guidelines This command globally enables the small-frame arrival feature. Use the small violation-rate interface

configuration command to set the threshold for each port.

You can configure the port to be automatically re-enabled by using the errdisable recovery cause

small-frame global configuration command. You configure the recovery time by using the errdisable

recovery interval interval global configuration command.

Examples This example shows how to enable the switch ports to be put into the error-disabled mode if incoming

small frames arrive at the configured threshold:

Switch(config)# errdisable detect cause small-frame

You can verify your setting by entering the show interfaces privileged EXEC command.

Release Modification

12.2(44)SE This command was introduced.