Installation guide

7
Release Notes for the Cisco ME 3400 Ethernet Access Switch, Cisco IOS Release 12.2(44)SE
OL-14632-01
Minimum Cisco IOS Release for Major Features
Configurable control plane security (support for ENIs) 12.2(44)SE
Configuration rollback and replacement 12.2(40)SE
EEM (metro IP access image only)
Note EEM support was added to the metro IP access image in 12.2(44)SE
12.2(40)SE
IGMP Helper (metro IP access image only) 12.2(40)SE
IP SLAs support (metro IP access and metro access images only) 12.2(40)SE
IP SLAs enhanced object tracking (metro IP access and metro access images only) 12.2(40)SE
IP SLAs for Ethernet OAM (metro IP access image only) 12.2(40)SE
Multicast VRF Lite (metro IP access image only) 12.2(40)SE
SSM PIM (metro IP access image only) 12.2(40)SE
REP (metro IP access and metro access images only) 12.2(40)SE
LLDP-MED location TLV (metro IP access and metro access images only) 12.2(40)SE
ELMI-CE 12.2(37)SE
LLDP and LLDP-MED 12.2(37)SE
Port security on a PVLAN host 12.2(37)SE
VLAN Flex Links load balancing 12.2(37)SE
Support for Multicast VLAN Registration (MVR) over trunk ports 12.2(35)SE1
Enhanced object tracking for HSRP (metro IP access image only) 12.2(35)SE1
Ethernet OAM IEEE 802.3ah protocol (metro IP access and metro access images only) 12.2(35)SE1
Ethernet OAM CFM (IEEE 802.1ag) and E-LMI (metro IP access and metro access images only) 12.2(25)SEG
Per port per VLAN QoS (metro IP access and metro access images only) 12.2(25)SEG
Support for all OSPF network types (metro IP access only) 12.2(25)SEG
Layer 2 protocol tunneling on trunks (metro IP access and metro access images only) 12.2(25)SEG
IS-IS protocol (metro IP access only) 12.2(25)SEG
NNIs on all ports (metro IP access image only) 12.2(25)SEG
DHCP server 12.2(25)SEG
DHCP Option-82 configurable remote ID and circuit ID 12.2(25)SEG
Multiple spanning-tree (MST) based on the IEEE 802.1s standard 12.2(25)SEG
Nonstop forwarding (NSF) awareness (metro IP access image only) 12.2(25)SEG
Secure Copy Protocol 12.2(25)SEG
Flex Links sub 100 ms convergence; preemptive switchover (metro IP access and metro access images) 12.2(25)SEG
Link-state tracking (trunk failover) (metro IP access and metro access images only) 12.2(25)SEG
Table 3 Features Introduced After the First Release and the Minimum Cisco IOS Release Required (continued)
Feature
Minimum Cisco IOS
Release Required