Specifications

B-42
Cisco ME 2400 Ethernet Access Switch Command Reference
OL-9643-03
Appendix B Cisco ME 2400 Ethernet Access Switch Debug Commands
debug platform tcam
Note Though visible in the command-line help strings, the log l3 acl, l3 ipv6 {acl {input | output} | local |
qos | secondary}, the l3 local, and the l3 secondary keywords are not supported.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform tcam command is the same as the no debug platform tcam command.
Related Commands
Release Modification
12.2(25)EX This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.