Specifications

2-387
Cisco ME 2400 Ethernet Access Switch Command Reference
OL-9643-03
Chapter 2 Cisco ME 2400 Ethernet Access Switch Cisco IOS Commands
snmp-server host
Note Though visible in the command-line help strings, the cpu, fru-ctrl, and vtp keywords are not supported.
Defaults This command is disabled by default. No notifications are sent.
If you enter this command with no keywords, the default is to send all trap types to the host. No informs
are sent to this host.
If no version keyword is present, the default is Version 1.
If Version 3 is selected and no authentication keyword is entered, the default is the noauth
(noAuthNoPriv) security level.
Command Modes Global configuration
Command History
notification-type (Optional) Type of notification to be sent to the host. If no type is specified,
all notifications are sent. The notification type can be one or more of the
these keywords:
• bridge—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.
• config—Send SNMP configuration traps.
• copy-config—Send SNMP copy configuration traps.
• entity— Send SNMP entity traps.
• envmon—Send environmental monitor traps.
• flash—Send SNMP FLASH notifications.
• mac-notification—Send SNMP MAC notification traps.
• port-security—Send SNMP port-security traps.
• rtr—Send SNMP Response Time Reporter traps.
• snmp—Send SNMP-type traps.
• storm-control—Send SNMP storm-control traps.
• stpx—Send SNMP STP extended MIB traps.
• syslog—Send SNMP syslog traps.
• tty—Send TCP connection traps.
• vlan-membership— Send SNMP VLAN membership traps.
• vlancreate—Send SNMP VLAN-created traps.
• vlandelete—Send SNMP VLAN-deleted traps.
Release Modification
12.2(25)EX This command was introduced.