Specifications

2-369
Cisco ME 2400 Ethernet Access Switch Command Reference
OL-9643-03
Chapter 2 Cisco ME 2400 Ethernet Access Switch Cisco IOS Commands
show vlan
show vlan
Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
show vlan [access-map | brief | filter | id vlan-id | mtu | name vlan-name | private-vlan [type] |
remote-span | summary | uni-vlan [type] ] [ | {begin | exclude | include} expression]
Syntax Description
Note Though visible in the command-line help string, the ifindex and internal usage keywords are not
supported.
Command Modes User EXEC
Command History
access-map See the show vlan access-map command.
brief (Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
filter See the show vlan filter command.
id vlan-id (Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094.
mtu (Optional) Display a list of VLANs and the minimum and maximum
transmission unit (MTU) sizes configured on ports in the VLAN.
name vlan-name (Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
private-vlan [type] (Optional) Display information about configured private VLANs, including
primary and secondary VLAN IDs, type (community, isolated, or primary)
and ports belonging to the private VLAN. Enter type (optional) to see only
the VLAN ID and the type of private VLAN.
remote-span (Optional) Display information about Remote SPAN (RSPAN) VLANs.
summary (Optional) Display VLAN summary information.
uni-vlan [type] (Optional) Display user network interface-enhanced network interface
(UNI-ENI) VLAN information. Enter type (optional) to see only the VLAN
ID and type of UNI-ENI VLAN.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)EX This command was introduced.