Specifications

2-242
Cisco ME 2400 Ethernet Access Switch Command Reference
OL-9643-03
Chapter 2 Cisco ME 2400 Ethernet Access Switch Cisco IOS Commands
show boot
Related Commands
Private Config file Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the
system configuration.
Enable Break Displays whether a break during booting is enabled or disabled. If it is set to yes, on, or
1, you can interrupt the automatic boot process by pressing the Break key on the console
after the flash file system is initialized.
Manual Boot Displays whether the switch automatically or manually boots. If it is set to no or 0, the
boot loader attempts to automatically boot the system. If it is set to anything else, you
must manually boot the switch from the boot loader mode.
Helper path-list Displays a semicolon separated list of loadable files to dynamically load during the boot
loader initialization. Helper files extend or patch the functionality of the boot loader.
Table 2-4 show boot Field Descriptions (continued)
Field Description
Command Description
boot config-file Specifies the filename that Cisco IOS uses to read and write a nonvolatile
copy of the system configuration.
boot enable-break Enables interrupting the automatic boot process.
boot manual Enables manually booting the switch during the next boot cycle.
boot
private-config-file
Specifies the filename that Cisco IOS uses to read and write a nonvolatile
copy of the private configuration.
boot system Specifies the Cisco IOS image to load during the next boot cycle.