Specifications

xv
Cisco ME 2400 Ethernet Access Switch Command Reference
OL-9643-03
Preface
Audience
This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to
manage the Cisco Metro Ethernet (ME) 2400 Series Ethernet Access switch, hereafter referred to as the
switch. Before using this guide, you should have experience working with the Cisco IOS commands and
the switch software features. You should also have experience working with the concepts and
terminology of Ethernet and local area networking.
Purpose
This guide provides the information you need about the Layer 2 commands that have been created or
changed for use with the Cisco ME 2400 Ethernet Access switch. For information about the standard Cisco
IOS Release 12.2 commands, see the Cisco IOS documentation set available from the Cisco.com home page
by selecting Service and Support > Technical Documents. On the Cisco Product Documentation home
page, select Release 12.2 from the Cisco IOS Software drop-down list.
This guide does not provide procedures for configuring your switch. For detailed configuration
procedures, see the software configuration guide for this release.
This guide does not describe system messages you might encounter. For more information, see the
system message guide for this release.
For the latest documentation updates, see the release notes for this release.