Technical information

Ordering Guide
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential/Proprietary—Pricing for illustration purposes only. Pricing subject to change. Page 66 of 93
Cisco no longer stocks HP components. . Order these direct from the HP using exact part numbers at
www.cisco.com/go/swonly .
Table 38. Cisco MCS 7800 Hard Drives
Product Number
Description
List Price ($US)
HDD-78xx-I5-250=
Spare 250GB Hard Disk Drive for MCS 7816/25/28-I5
HDD-7835-I3-146=
Spare 146-GB 10K SAS Hard Disk drive for MCS-7835-I3
HDD-7845-I3-146=
Spare 146-GB 10K SAS Hard Disk drive for MCS-7845-I3
f. Rail Kits
All currently shipping Cisco MCS 7800 servers include a “generic/third-party rail kit”.
●
Compliant with 19-inch Industry-standard EIA-310D
●
Depth range of the slides is from 440mm to 790mm
●
Threaded racks: M6, 10-32, and 12-24
●
Also enables punched round and square hole racks
Use native HP/IBM documents for instructions on installing the rail kits.
If you require rail kits for a different rack type (such as telco racks or HP or IBM proprietary racks), order that directly
from IBM or HP. Cisco does not provide SKUs for rail kits.
g. Fan Modules
Cisco does not provide SKUs for fan spares on the latest Cisco MCS 7800 models. Order these direct from
the server vendor using exact part numbers at www.cisco.com/go/swonly . h. Power Supplies
Cisco does not provide SKUs for power supply spares on the latest Cisco MCS 7800 models. . Order these direct
from the server vendor using exact part numbers at www.cisco.com/go/swonly .
Cisco supports Direct Current (DC) power supplies on select IBM server configurations purchased as
“Software-only” from IBM. See www.cisco.com/go/swonly for more details. i. Power Cords
Note: At this time Cisco MCS 7800 does not support Direct Current (DC) power supplies, only Alternating Current
(AC) power supplies. DC power supplies affect features such as environmental instrumentation, auto-restart
behavior, and UPS integration, and therefore are not supported.
In the SKUs for the Cisco MCS 7800, Cisco provides options for configuring AC power cords for various countries,
and these cords will ship with the MCS (either one or two depending on the number of power supplies used by the
Cisco MCS 7800 model). IBM may also ship additional power-cord types with some of its models.
Customers requiring a different power-cord type (such as hooded power cords, or male/female connector variants for
hookup to a UPS) should consult HP/IBM directly for what is supported. The power cords are available from HP/IBM
as well as several third parties. Cisco does not provide SKUs for these power-cord variants.
j. Service Processors
MCS 7835/45-I3 and MCS 7816/25/28-I5 have partial support for IBM’s Integrated Management Module (IMM)
service processor.