Technical information

Ordering Guide
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential/Proprietary—Pricing for illustration purposes only. Pricing subject to change. Page 64 of 93
●
Cisco MCS 7845-H2:
◦ SCSI tape drive not supported
◦ USB tape drive:
Cisco Unified Communications Manager 5.1(3)+: Supported without PCI-to-USB adaptor
●
Cisco MCS 7815-I1 and MCS 7815-I2 with Cisco Unified Communications Manager 5.0+:
◦ SCSI tape drive not supported
◦ USB tape drive not supported
●
All other HP & IBM model generations:
◦ SCSI tape drive not supported
◦ USB tape drive:
Cisco Unified Communications Manager 5.0: Not supported
Cisco Unified Communications Manager 5.1(3)+: Supported without PCI-to-USB adaptor
c. Hardware for Music on Hold
This section concerns you only if you require an external audio/music source for the Cisco Unified Communications
Manager Music On Hold (MOH) feature. Cisco Unified Communications Manager uses an external USB-to-audio
dongle for audio connectivity to external sources.
Cisco Unified Communications Manager on the Cisco MCS 7835-1000, MCS 7835-1266, and MCS 7845-1400 used
to certify (but not resell) the AOpen AW-840 PCI sound card. This sound card is no longer supported by Cisco.
For Cisco Unified CallManager 3.0 and 4.0 on older servers, Cisco used to certify (but not resell) the Griffin iMic USB
Audio Interface with IPT OS 2000.2.7 or higher and the Telex Communications P-800 USB Digital Audio Converter
with IPT OS 2000.2.5 or later. Both of these devices are End of Life so are no longer available. Cisco now sells a new
USB-to-audio dongle device with the SKU in Table 34.
Existing Cisco Unified CallManager 3.0 and 4.0 customers with Griffin or Telex devices already deployed may
upgrade to 4.3 and keep using these devices until they upgrade to 5.0 or later, when they must replace with the SKU
given in Table 34.
New purchases of Cisco Unified CallManager 4.3 or later must order the SKU given in Table 34 if they wish to use
“Unicast MOH” with an external music source. The SKU also applies to Software-only customers, who must
remember to retain the device if their server is ever returned to or replaced by their hardware provider. Note that this
device uses “S/PDIF 2.5mm plug-in jacks” for physical connection to the audio source. Customers wishing to use
“Multicast MOH” do not require this part as they will be leveraging a Cisco Router to source the music.
Table 35. Hardware for Music On Hold
Product Number
Description
List Price ($US)
MOH-USB-AUDIO=
Music On Hold USB Adapter
$99
For customers upgrading to Cisco Unified CallManager 4.3 and want to keep their Griffin or Telex devices, Table 35
gives the hardware compatibility:
Table 36. Griffin iMic and Telex Communications P-800 Compatibility with Cisco MCS 7800
Supported with Griffin iMic
Supported with Telex P-800
MCS-7815-I1-IPC1
MCS-7815-I1-IPC3
MCS-7815-I2-IPC1
MCS-7816-H3-IPC1
MCS-7815-I-3.0-IPC1
MCS-7815-I1-IPC1
MCS-7825-H-2.2-EVV1
MCS-7825-H-3.0-IPC1