Technical information
Ordering Guide
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential/Proprietary—Pricing for illustration purposes only. Pricing subject to change. Page 58 of 88
If the customer is ordering Cisco Emergency Responder, or otherwise needs a bare-metal server (i.e. hardware with
nothing factory pre-loaded), please order from Table 32 below.
Table 32. Bare-metal MCS SKUs
Product Number
Description
List Price ($US)
UCSS Orderable?
MCS-7816-I5-IPC1
Bare Metal MCS 7816-I5 server 1xX3430 , 4GB RAM and 1x250GB HDD
$4,000
No
MCS-7825-I5-IPC1
Bare Metal MCS 7825-I5 server 1xX3430 , 4GB RAM and 2x250GB HDD
$7,000
No
MCS-7835-I3-IPC1
HW Only MCS-7835-I3 with 4GB RAM and Two 146GB SAS HD
$12,000
No
MCS-7845-I3-IPC1
HW Only MCS-7845-I3 with 6GB RAM and Four 146GB SAS HD
$24,000
No
If the customer needs a factory pre-loaded appliance (i.e. hardware with the UC application pre-loaded), please order
from Table 33 below. Note that there are different appliance SKUs for each UC application and version.
Table 33. Cisco Unified Communications Manager Appliance SKUs (i.e. with factory-pre-loaded software)
Product Number
Description
List Price ($US)
UCSS Orderable?
Unified CM 8.5
MCS7816I5-K9-CMD2
Unified CM 8.5 7816-I5 Appliance, 0 Seats
$4,000
Yes
MCS7825I5-K9-CMD2
Unified CM 8.5 7825-I5 Appliance, 0 Seats
$7,000
Yes
MCS7835I3-K9-CMD2
Unified CM 8.5 7835-I3 Appliance, 0 Seats
$12,000
Yes
MCS7845I3-K9-CMD2
Unified CM 8.5 7845-I3 Appliance, 0 Seats
$24,000
Yes
Unified CM – Session Manager Edition 8.5
MCS7845I3-K9-SMD2
Unified SME 8.5 7845-I3 Appliance
$24,000
Yes
Cisco Intercompany Media Engine 8.0(2)
MCS7825I5-K9-IMD2
Cisco IME 8.0 7825-I5 Appliance
$7,000
Yes
MCS7845I3-K9-IMD2
Cisco IME 8.0 7845-I3 Appliance
$24,000
Yes
Configure all of the above with an appropriate power cord selection. Media kits only ship with appliance SKUs.
Separate SKUs for software licensing are required to actually activate and run the UC applications.
If the wrong hardware SKU is ordered (e.g. a –CMB2 instead of a –CMC2), contact cs-support@cisco.com to get the
order changed. Alternatively, if customer has UCSS, they can get the correct software via Product Upgrade Tool or
Voice Software Center on Cisco.com.
3. Order any onsite spares, if desired.
Some customers wish to supplement Cisco SmartNet with an onsite spare MCS 7800. Customers should order a
“bare-metal” MCS SKU from Table 32 above for this. Note that attempting to transfer UC software licenses to this
spare machine will require a “re-hosting” of license keys. Configure with the appropriate power cord.
3. Order any hardware add-ons, if desired or needed.
If customers want to make any of the following hardware add-ons, see section 5.3 below.
●
Add Hardware Security Key for Cisco Unified Communications Manager
●
Add External tape drives for backups