Technical information

Ordering Guide
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential/Proprietary—Pricing for illustration purposes only. Pricing subject to change. Page 34 of 88
Product Number
Description
List Price ($US)
Number of Nodes
UCSS Orderable?
UCM-7816-85
CUCM 8.5 7816
$0
0 to 15
N
UCM-7825-85
CUCM 8.5 7825
$0
0 to 15
N
UCM-7835-85
CUCM 8.5 7835
$0
0 to 15
N
UCM-7845-85
CUCM 8.5 7845
$0
0 to 15
N
Cisco Intercompany Media Engine Options
IME-7825-85
IME 8.5 7825
$ 0
0 to 5
N
IME-7845-85
IME 8.5 7845
$ 0
0 to 5
N
Below are specific recommendations for combinations of “from” and “to” software versions.
From Cisco Unified Communications Manager 3.0, 4.0, 5.0, 6.0, or 7.0 to 8.0(1)
Follow the steps above to upgrade to 8.0(1) with User Connect Licensing via either UCSS, UCL Software Migration
SKU with UCSS, or UCL Software Upgrade SKU without UCSS.
From Cisco Unified Communications Manager 7.0(0) or 7.1(0) to 7.1(5)
Customers already on 7.0(0) or 7.1(1-4) with valid service contracts are already entitled to download 7.1(5) from
Cisco.com.
When the customer later upgrades to 8.0, follow the steps above to upgrade to 8.0(1) with User Connect Licensing
via UCSS, UCL Software Migration SKU with UCSS, or UCL Software Upgrade SKU without UCSS.
From Cisco Unified Communications Manager 3.0, 4.0, 5.0, or 6.0 to 7.1(5)
Follow the steps above to upgrade to 7.1(5) with User Connect Licensing via UCSS, UCL Software Migration SKU
with UCSS, or UCL Software Upgrade SKU without UCSS.
3.2 Cisco Unified Communications Manager Upgrades for Cisco TelePresence or Video-Only
Deployments
Do the following:
Verify server compatibility and direct upgrade paths as with upgrades for users.
If you are covered by UCSS, the new Cisco Unified Communications Manager 7.1(5) or 8.0(1) version can be
obtained just as with upgrades for users.
If you are not covered by UCSS, then do the following:
Step 1. In the Dynamic Configuration Tool (DCT), start with the top-level part number “CUCM-TP-BNDL-UPG” with
list Price of $7,375.
Step 2. After selecting the necessary Starter Product, select one of the Required Call Control options and one of the
required Cisco Intercompany Media Engine options from Table 23 for each server in the cluster. Select the
number of Nodes that make up the cluster. This selection will deliver media and node licenses for the Cisco
Unified Communications Manager cluster.
Table 22. Call-Control Options for user-less deployments (Cisco TelePresence or Video-only).
Product Number
Description
List Price ($US)
Number of Nodes
UCSS Orderable?
Call Control Options
UCM-7816-85
CUCM 8.5 7816
$0
2
Y
UCM-7825-85
CUCM 8.5 7825
$0
2
Y
UCM-7835-85
CUCM 8.5 7835
$0
2
Y