Specifications

Configuration View Device Configuration View
Device Management Page 91 Cisco MC3810
Bandwidth
The estimated bandwidth of the interface
measured in bits per second. For interfaces that
do not vary in bandwidth or for which no accurate
estimate can be made, a nominal bandwidth is
provided.
Physical Address
The Ethernet (MAC) address of the port.
Operation Status
The current operational state of the port (On, Off,
or Testing).
Admin Status
The desired operational state of the port (On, Off,
or Testing).
Last Change
The System UpTime value when the port entered
its current operational state.
Change Reason
An ASCII text string explaining why the system
was last restarted.
Queue Length
The length of the outbound packet queue in
packets.
Packet Size
The largest Maximum Transmission Unit (MTU)
that can be transmitted or received by the port
measured in octets.
Redundancy and Model
Reconfiguration Options View
Access: In the Device Configuration View, click the
Discover/Reconfigure Control button.
This view allows you to enable redundant
addresses, have SPECTRUM notify you of a
redundancy update, and reconfigure aspects of
your network connections.
This button opens the Preferred Addresses dialog
box which allows you to select the redundant
preferred address for the device.
Redundancy Administrative Status
Set this button to “Enabled” to cause SPECTRUM
to update this model with an address from the
Redundant Preferred Address list when the
primary address is not accessible.
Generate Redundancy Alarms
Set this button to “True” to cause SPECTRUM to
generate an alarm when a redundant address is
selected.
Preferred Addresses