Datasheet

3-18

Installing and Migrating to Cisco Prime LAN Management Solution 4.1

OL-25239-01

Chapter 3 Preparing to Install Cisco Prime LAN Management Solution 4.1

Application Scaling Numbers

This section presents information on the specific scaling numbers for each of the LMS functionalities in

LMS server:

The scaling numbers for LMS are as follows:

Functionality Scalability Limit on LMS Server

Grouping Services For upto LMS 500 Device licenses, the following are the scaling limits:

• 30 user-defined groups

• 15 IPSLA groups

• 10 Fault groups

• 15 Port and Module Groups

For LMS 500 to LMS 1000 Device licenses, the following are the scaling

limits:

• 200 user-defined groups

• 100 IPSLA groups

• 50 Fault groups

• 100 Port and Module Groups

For LMS 2500 Device licenses, the following are the scaling limits:

• 200 user-defined groups

• 200 IPSLA groups

• 50 Fault groups

• 100 Port and Module Groups

For LMS 5000 Device licenses, the following are the scaling limits:

• 200 user-defined groups

• 100 IPSLA groups

• 50 Fault groups

• 100 Port and Module Groups

Note The recommended limit for creating user-defined group is 200, but

you are allowed to create upto 600 user-defined groups in LMS.

Inventory, Config and

Image Management

In a LMS server, when only this functionality is managed, it supports the

following:

• 10,000 devices

• 200 Port and Module Configuration (PMC) groups with 90% port

groups and 10% module groups

• Maximum of 500,000 ports with an average of 50 ports per device

• Maximum of 100,000 ports in a port and Module Configuration group

• Maximum of 250,000 ports for each LMS job

In addition to the above, Syslog reports can contain upto 40,000 records