User guide

Chapter 3
Configuration
8
RangePlus Wireless Network USB Adapter
WEP Key If you do not have the Passphrase, enter
the WEP key, which must match the WEP key of your
wireless network. For 64-bit encryption, enter exactly 10
hexadecimal characters (“0” to “9” and “A” to “F”.) For 128 -bit
encryption, enter exactly 26 hexadecimal characters.
Click Connect and proceed to step 3.
WPA Personal
If the network has WPA Personal security enabled, then
you see the WPA Personal Needed for Connection screen.
WPA-Personal Security
Encryption Select the type of algorithm you want to use,
TKIP or AES.
Pre-shared Key Enter the network’s Pre-shared Key of 8-
63 characters.
Click Connect and proceed to step 3.
WPA2 Personal
If the network has WPA2 Personal security enabled, then
you see the WPA2 Personal Needed for Connection screen.
WPA2-Personal Security
Pre-shared Key Enter the network’s Pre-shared Key of 8-
63 characters.
Click Connect and proceed to step 3.
After the profile installs, the 3. Congratulations screen
appears. Click Finish.
Congratulations
Congratulations! The profile is
successfully configured.
Advanced Setup
If your network is not listed with the available networks,
use Advanced Setup.
Available Wireless Networks
Click 1. Advanced Setup on the Available Wireless
Networks screen to set up the Adapter manually.