Specifications

Configuration Views Switch Application Interface Configuration View
Device Management Page 76 Cisco LightStream 1010
Config VCCs
The number of configured VCCs on the interface.
Max VPI Bits
Maximum number of Virtual Path Identifier bits
(VPI bits) allowed on this interface
Max VCI Bits
Maximum number of Virtual Channel Identifier
bits (VCI bits) allowed on this interface.
ILMI VPI
The VPI value of the VCC supporting the ILMI at
this ATM interface.
ILMI VCI
The VCI value of the VCC supporting the ILMI at
this ATM interface.
Address Type
The type of primary ATM Address configured for
use on this ATM interface. Possible values are:
private, nsape164, nativeE164, and other.
Admin Address
An address assigned for administrative purposes.
Neighbor Address
The IP Address of the neighbor system connected
to the far end of this interface, to which a network
management station can send SNMP messages in
order to access network information concerning
the operation of the neighbor system.
Neighbor IF Name
The interface name of the neighbor system
connected to the far end of this interface.
IF Configuration Table
This table provides the following information
about the LightStream interface configuration:
IF Index
The value of this object identifies the interface for
which the entry contains management
information.
Connections
The number of connections currently attached to
the interface.
PVPs
The number of PVPs currently attached to the
interface.
PVCs
The number of PVCs currently attached to the
interface.
Active SVPs
The number of SVPs currently active on the
interface.