Specifications

Configuration Views Switch Resource Management Configuration Details View
Device Management Page 74 Cisco LightStream 1010
Failed (Delay)
The number of resource allocation requests which
are considered to be in error because they exceed
cell loss criterion.
Failed (Cell Delay Var)
The number of resource allocation requests which
are considered to be in error because they exceed
cell delay variation criterion.
Failed (BE Limit)
The number of resource allocation requests which
are considered to be in error because they exceed
a limit on the number of best-effort connections.
Failed (Parm Limit)
The number of resource allocation requests which
are considered to be in error because they exceed
cell delay variation criterion.
Failed (Other)
The number of resource allocation requests which
are considered to be in error for an unknown
reason.
Interface Resource Management
Output Queue Configuration View
This view contains the Output Queue
Configuration Table, which provides the following
information:
Service Cat
The Service Category(s) sharing this output queue
on the ATM interface. Possible bit positions are:
1: constant bit rate (CBR)
2: variable bit rate- real time (VBR-RT)
4: variable bit rate-non real time (VBR-NRT)
8: available bit rate (ABR)
16: unspecified bit rate (UBR)
24: not defined
Req. Max Size
The configuration of the maximum number of
cells that may occupy this queue. If the default
value is 0 then the queue size is calculated by
software.
Inst. Max Size
The maximum number of cells that may occupy
this queue. This value will be a multiple of 32.