Specifications

Configuration Views Switch Resource Management Configuration Details View
Device Management Page 73 Cisco LightStream 1010
Alloc Cell Rate (TX)
The allocated cell rate, in cells per second, for
traffic transmitted on the interface for this Service
Category. This is the bandwidth available to
connections.
# Signalled Conns
The number of signalled connections (VC or VP) of
this Service Category currently allocated on this
interface.
# Permanent Conns
The number of permanent connections (VC or VP)
of this Service Category currently allocated on
this interface.
Max Cell Trans. Delay
The Maximum Cell Transfer Delay estimated to be
experienced by cells of connections transmitted
on this interface for the Service Category.
Peak to Peak CDV
The default peak-to-peak Cell Delay Variation
estimated to be experienced by cells of
connections transmitted on this interface for the
Service Category.
TX Cell Loss Ratio
The Cell Loss Ratio estimated to be experienced
by cells of connections transmitted on this
interface for the Service Category.
Interface Resource Management
Statistics Information View
This view is a table implemented using integers. It
provides the following information.
All of these fields are cross-referenced by Service
Category. The categories are CBR, VBR RT, VBR
NRT, ABR, and UBR.
Total Alloc Requests
The number of resource allocation requests for
this interface.
Successful
The number of successful resource allocation
requests for this interface.
Failed (Trafic Params)
The number of resource allocation requests which
are considered to be in error due to an
unsupported combination of traffic parameters.
Failed (Lack Bandwidth)
The number of resource allocation requests which
are considered to be in error due to a lack of
bandwidth.
Failed (Cell Loss)
The number of resource allocation requests which
are considered to be in error due to exceeding cell
loss criterion.