Specifications

Configuration Views Switch Resource Management Configuration Details View
Device Management Page 71 Cisco LightStream 1010
MaxAgg. (not defined for logical port ATM
interfaces).
Link Share Min VBR
A Configuration in the Controller Link Sharing
(CLS) scheme which specifies a minimum amount
of VBR traffic that can be reserved in a traffic
direction on an interface. It is expressed as a
percentage of the maximum traffic direction's
bandwidth (applies after output pacing, for
example). This object interacts with MinCbr,
MinAbr, and MinUbr (if specified), such that
MinVbr + MinCbr + MinAbr + MinUbr <= 95%.
This object interacts with MaxVbr (if specified)
such that MinVbr <= MaxVbr. If the object is set
to -1, the object is considered to be unspecified
This object is not defined for logical port ATM
interfaces.
Link Share Max VBR
A configuration in the Controller Link Sharing
(CLS) scheme which specifies the maximum VBR
traffic that can be allocated in a traffic direction
on an interface. It is expressed as a percentage of
the maximum traffic direction's bandwidth
(applies after output pacing, for example). This
object interacts with MinVbr (if specified) such
that MinVbr <= MaxVbr. This object also interacts
with MaxAgg (if specified) such that MaxVbr <=
MaxAgg. If the object is set to -1, the object is
considered to be unspecified. This object is not
defined for logical port ATM interfaces.
Max CBR PCR
This value specifies the maximum Peak Cell Rate
(PCR) traffic parameter that can be specified for
CBR connections in a traffic direction on an
interface. It is specified in cells-per-second.
Max CBR Tolerance
This value specifies the maximum limit
parameter, in cell-times, used in the GCRA
algorithm for traffic policing that can be specified
for CBR connections in a traffic direction on an
interface.
Max VBR PCR
This value specifies the maximum PCR traffic
parameter that can be specified for VBR
connections in a traffic direction on an interface.
It is specified in cells-per-second.
Max VBR SCR
This value specifies the maximum Sustained Cell
Rate (SCR) traffic parameter that can be specified
Note:
Note:
The following fields can be disabled by
entering the value 4294967295.