Specifications

Configuration Views Switch Resource Management Configuration Details View
Device Management Page 70 Cisco LightStream 1010
chapter, Clicking on Thresholds opens the
Interface Resource Management Thresholds View
described in this chapter.
Interface Resource Management
Traffic Flow Direction View
This view displays detailed information on the
traffic flow direction of the ATM interface.
Max Aggregate
A configuration in the Controller Link Sharing
(CLS) scheme which specifies the maximum
aggregate Guaranteed Service (CBR or VBR)
traffic that can be allocated in a traffic direction
on an interface. It is expressed as a percentage of
the maximum traffic direction's bandwidth
(applies after output pacing, for example). This
object interacts with MaxVbr (if specified) such
that MaxVbr <= MaxAgg. This object interacts
with MaxCbr (if specified) such that MaxCbr <=
MaxAgg. This object interacts with MaxAbr (if
specified) such that MaxAbr <= MaxAgg. This
object interacts with MaxUbr (if specified) such
that MaxUbr <= MaxAgg.If the object is set to -1,
the object is considered to be unspecified. This
object is not defined for logical port ATM
interfaces.
Link Share Min CBR
A Configuration in the Controller Link Sharing
(CLS) scheme which specifies a minimum amount
of CBR traffic that canbe reserved in a traffic
direction on an interface. It is expressed as a
percentage of the maximum traffic direction's
bandwidth (applies after output pacing,for
example). This object interacts with MinVbr,
MinAbr, MinUbr (if specified) such that MinVbr +
MinCbr + MinAbr + MinUbr <= 95%. This object
interacts with MaxCbr (if specified) such that
MinCbr < MaxCbr.If the object is set to -1, the
object is considered to be unspecified. This object
is not defined for logical port ATM interfaces.
Link Share Max CBR
A Configuration in the Controller Link Sharing
(CLS) scheme which specifies the maximum CBR
traffic that can be allocated in a traffic direction
on an interface. It is expressed as a percentage of
the maximum traffic direction's bandwidth
(applies after output pacing, for example). This
object interacts with MinCbr (if specified) such
that MinCbr <= MaxCbr. This object interacts
with MaxAgg (if specified) such that MaxCbr <=
Note:
Note:
A change to the value of these fields
will affect subsequent connections,
not the existing connection.