Specifications

Introduction Supported Devices
Device Management Page 7 Cisco LightStream 1010
Supported Devices
SPECTRUM management module SM-CIS1002
currently lets you model the Cisco LightStream
1010 ATM Switch. The LightStream 1010 is a five
slot modular chassis that provides switched ATM
connections to individual workstations, servers,
LAN segments, or other ATM switches and
routers, using fiber-optics, unshielded twisted-
pair (UTP), and coaxial cable. The central slot is
dedicated to an ATM Switch Processor (ASP)
module that supports both 5 Gbps shared
memory and fully non-blocking switch fabric. The
ASP card also supports a Reduced Instruction Set
(RISC) processor that is the intelligence for the
chassis. The remaining slots support up to four
Carrier Modules (CAMs) with each of these
supporting up to two Port Adapter Modules
(PAMs).
The SPECTRUM Model
The model type for the Cisco devices is LS1010.
Modeling results in the creation of Device icons
that represent the devices and Application icons
that represent their supported applications.
The Device icons contain double-click zones and
provide access to Icon Subviews menus that let
you perform device management activities such
as those listed in Tasks on Page 9.
As Figure 1 shows, the appearance of the Device
icons varies slightly depending on the kind of view
it appears in.
Figure 1: Device Icons
Model Name
Model Name
Small Device icon appears in
Topology and Application views
Large Device icon appears in
Device Topology, Location, and
Device Interface views.