Specifications

Configuration Views Interface Configuration View
Device Management Page 66 Cisco LightStream 1010
ILMI Keep Alive
The amount of time, in seconds, that should
elapse between successive ILMI keepalive
messages sent on this interface. A value of 0
disables this function.
IF Type
Displays the type of interface. Auto-configuration
must be disabled to modify this field. Table 12
lists all possible values.
UNI Type
The type of User to Network Interface (UNI) this
interface is using. Its value can be either public or
private.
Side
The side of the network user interface which is
either a user or network side. Not Applicable
indicates that it is other than uni or iisp.
Port Type
The type of physical layer medium on the port.
Possible values are cpu, ethernet, oc3Utp,
oc3SingModeFiber, oc3MultiModeFiber,
oc12SingModeFiber, ds, e3, and other.
Received Cells
The number of cells received on this interface.
Received Led
The received LED color for this port. Possible
values are: off, steadyGreen, steadyYellow,
steadyRed, flashGreen, flashYellow, and
flashRed.
Xmited Cells
The number of cells transmitted on this interface.
Xmit Led
The transmitted LED color for this port. Possible
values are: off, steadyGreen, steadyYellow,
steadyRed, flashGreen, flashYellow, and
flashRed.
Active SVPs
The number of active Switched Virtual Paths
(SVPs) at this interface.
Table 12: IF Type Value
Value Description
undef undefined
other none of the following
uni user-network interface
pnni public network-node interface
iisp inter-switch signalling protocol
nniPvcOnly network-node interface permanent
virtual connection only