Specifications

Configuration Views Interface Configuration View
Device Management Page 65 Cisco LightStream 1010
Time Completed
The time the Copy State last transitioned from
running to successful or failed states. This object
is instantiated only after the row has been
instantiated. Its value will remain 0 until the
request has completed.
Fail Reason
The reason why the config-copy operation failed.
This object is instantiated only when the Copy
State for this entry is in the failed state.
Row Status
The status of this table entry. Once the entry
status is set to active, the associated entry cannot
be modified until the request completes (Copy
State transitions to successful or failed state).
Add an Entry
This button opens the Add a Cisco Copy Config
Entry view which allows you to add an entry to
the Cisco Copy Config Table.
Interface Configuration View
Access: Select IF Configuration from the Icon Subviews
menu.
This view contains more detailed network
configuration information for the device interface.
This view provides the following information:
IF Index
Displays the index which is attached to the
selected interface.
Total Connections
The total number of existing connections at this
interface.
ILMI Config
Enable/Disable Interim Local Management
Interface (ILMI) configuration on this interface.
The configuration takes effect on the next
interface restart.
ILMI Auto Config
Enable/Disable ILMI link and interface type
determination. The configuration takes effect on
the next interface restart
ILMI Address Reg
Enable/Disable ILMI address registration on this
interface. This configuration takes effect on the
next interface restart.