Specifications

Configuration Views Device Configuration View
Device Management Page 64 Cisco LightStream 1010
Address and File Name must also be created, and
these three objects together (Dest File Type,
Server Address, File Name) will uniquely identify
the destination file. If the Dest File Type is iosFile,
the File Name must also be created, and the two
objects together (Dest File Type, File Name) will
uniquely identify the destination file. Possible
types are networkFile, iosFile,
startupConfig, runningConfig, and terminal.
Server Address
The IP address of the TFTP server from (or to)
which to copy the configuration file. This object
must be created when either the Source File Type
or Dest File Type has the value networkFile.
Values of 0.0.0.0 or FF.FF.FF.FF. for Server
Address are not allowed.
File Name
The file name (including the path, if applicable) of
the file. This object must be created when either
the Source File or Dest File Type has the value
networkFile or iosFile.
User Name
Remote user name for copy via rcp protocol. This
object must be created when the Protocol is rcp or
ftp. If the protocol is rcp, it will override the
remote user name configured through the rcmd
remote-username configuration command. The
remote user name is sent as the server user-name
in an rcp command request sent by the system to
a remote rcp server.
User Password
Password used by ftp for copying a file to/from an
ftp server. This object must be created when the
Protocol is ftp. Reading it returns a zero-length
string for security reasons.
Notification On Completion
Specifies whether or not a Notification on
Completion should be issued on completion of the
tftp transfer. If such a notification is desired, it is
the responsibility of the management entity to
ensure that the SNMP administrative model is
configured in such a way as to allow the
notification to be delivered.
State
The state of this config-copy request. This value of
this object is instantiated only after the row has
been instantiated, i.e., after the Row Status has
been made active.
Time Started
The time the Copy State last transitioned to
running, or 0 if the state has never transitioned to
running (for e.g., stuck in waiting state). This
object is instantiated only after the row has been
instantiated.