Specifications

Configuration Views Device Configuration View
Device Management Page 61 Cisco LightStream 1010
Initiates the transfer of configuration file from
host to server.
TFTP Server Addr
Address used to send the configuration file from
server to a host.
File Name
The file name where you are storing the
configuration.
Initiates the transfer of configuration file from
server to host.
Host Configuration
The host configuration file contains commands
that apply to one network server in particular.
Previous Host Addr
The address of the host that provided the host
configuration file for the managed device.
Previous File Name
The name of the last host configuration file used
by the device.
New Host Addr
This field replaces the Previous Host Addr field
when the Upload Host Config file is selected.
New File Name
This field replaces the Previous File Name field
when the Upload Host Config file is selected.
Initiates the transfer of configuration file from
host to server.
Clicking this button writes the current (running)
server configuration into Non-Volatile Random
Access Memory (NVRAM) where it can be stored
and retained even if the server is reloaded.
Clicking this button erases whatever was in Non-
Volatile Random Access Memory (NVRAM) on the
server.
Upload Net Config File
Copy Config to Net
Upload Host Config File
Copy Config to NVRAM
Clear NVRAM