Specifications

Device Management Page 6 Cisco LightStream 1010
Introduction
This section introduces the SPECTRUM Device Management documentation for the Lightstream 1010 ATM
Switch manufactured by Cisco.
This introduction contains the following topics:
• Purpose and Scope
• Required Reading
• Supported Devices (Page 7)
• The SPECTRUM Model (Page 7)
Purpose and Scope
Use this document as a guide for managing the
Cisco devices described on Page 7 with
SPECTRUM management module SM-CIS1002.
This document describes the icons, menus, and
views that enable you to remotely monitor,
configure, and troubleshoot Lightstream devices
through software models in your SPECTRUM
database.
Information specific to SM-CIS1002 is what is
primarily included in this document. For general
information about device management using
SPECTRUM and explanations of SPECTRUM
functionality and navigation techniques, refer to
the topics listed under Required Reading.
Required Reading
To use this documentation effectively, you must
be familiar with the information covered by the
other SPECTRUM online documents listed below.
• Getting Started with SPECTRUM for
Operators
• Getting Started with SPECTRUM for
Administrators
• How to Manage Your Network with
SPECTRUM
• SPECTRUM Views
• SPECTRUM Menus
• SPECTRUM Icons
• SPECTRUM Software Release Notice