Specifications

Configuration Views Device Configuration View
Device Management Page 58 Cisco LightStream 1010
This button opens the Cisco Running Config
Event/Alarm Configuration View.
Interface Configuration Table
This section of the Cisco Configuration view
provides the following port configuration
information for each of the Cisco’s ports.
Index
The port number on the Cisco Router.
Description
A textual description of the interface, which may
include the name of the manufacturer, the
product name, and version number of the
hardware interface.
Type
The type of interface for the port.
Bandwidth
The estimated bandwidth of the interface
measured in bits per second. For interfaces that
do not vary in bandwidth or for which no accurate
estimate can be made, a nominal bandwidth is
provided.
Physical Address
The Ethernet (MAC) address of the port.
Operation Status
The current operational state of the port (On, Off,
or Testing).
Admin Status
The desired operational state of the port (On, Off,
or Testing).
Last Change
The System UpTime value when the port entered
its current operational state.
Change Reason
An ASCII text string explaining why the system
was last restarted.
Queue Length
The length of the outbound packet queue in
packets.
Packet Size
The largest Maximum Transmission Unit (MTU)
that can be transmitted or received by the port
measured in octets.
Redundancy and Model
Reconfiguration Options View
Access: In the Device Configuration View, click the
Discover/Reconfigure Control button.
This view allows you to enable redundant
addresses, have SPECTRUM notify you of a
Running Configuration Changes