Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 40 Cisco LightStream 1010
would require a new computation of the
background routes.
Insignificant Threshold
Specifies the number of insignificant changes
necessary to trigger a new computation of the
background routes.
Resource Management Polling Interval
Specifies how often Private Network to Network
Interface (PNNI) polls resource management to
update the values of local interface metrics and
attributes.
Administrative Weight Mode
Specifies the mode of default administrative
weight assignment for PNNI interfaces. When the
value is set to uniform, by default the
administrative weight of each PNNI interface is set
to 5040, as defined in the ATM Forum PNNI 1.0
specifications. When the value is set to
linespeed, by default the administrative weight
is set based on the linespeed or maximum cell
rate of the interface.
Maximum Administrative Weight Percentage
Specifies the maximum acceptable administrative
weight for alternate routes as a percentage of the
least administrative weight of any route to the
destination. This only takes effect when
background route computation is enabled.
Route Optimization Threshold
Specifies the percentage reduction, in the
administrative weight of the existing path,
required to trigger route optimization.
Switch Application PNNI Node Table
View
Internal Summary Address(es)
Specifies whether automatic generation of an
internal summary address based on the switch
address or node ID is enabled.
Redistribute Static Routes
Specifies whether redistribution of ATM static
routes to the PNNI routing domain is enabled.
Maximum PTSE Requests
Specifies the maximum number of PNNI Topology
State Elements (PTSEs) that can be requested in
one PTSE request packet.
Name
The name of the PNNI node.
Scope Mapping
Specifies the configuration mode of the mapping
from organizational scope values to PNNI scope.
Double-clicking any entry in this table will open
the Switch Application PNNI Node View, which