Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 34 Cisco LightStream 1010
Switch Application Traffic
Parameter Table View
Access: From the Icon Subviews menu for the
LS_Switch_App icon, select Traffic Parameter.
In addition to the following information, double-
clicking any entry in this table will open the
Switch Application Traffic Parameter View, which
contains the same information as the table view
with the exception that it pertains only to the
selected entry.
Index
This object is used by the virtual link table to
identify the row of this table
Descriptor Type
The value of this object identifies the type of ATM
traffic descriptor.
Param 1
The first parameter of the ATM traffic descriptor.
Param 2
The second parameter of the ATM traffic
descriptor.
Param 3
The third parameter of the ATM traffic descriptor.
Param 4
The fourth parameter of the ATM traffic
descriptor.
Param 5
The fifth parameter of the ATM traffic descriptor.
QoS Class
The value of this object identifies the Quality of
Service (QoS) class. Table 7 identifies the Service
Class values.
Row Status
Indicates the status of the row entry. This value is
also used to create delete and modify existing
rows. Possible values are: active,
Table 7: Service Class Values
Value Description
1cbr.
2vbrRt.
3vbrNrt
4abr
5ubr
6notDef