Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 31 Cisco LightStream 1010
Out Cells
The total number of cell transmitted on this VPL.
AAL Encap Protocols
Protocol for terminating the Virtual Channel, if
the encapFlag value is set to aal5mux. Possible
protocol values are: ip, xns, appletalk, clns,
decnet, novell, apollo, vines, and other.
AAL Encap Flag
Encapsulation type for terminating a Virtual
Channel. Possible values are: aal5Snap,
aal5Nlpid, aal5FrNlpid, aal5mux, aal34Smds,
aalQsAal, aal5Ilmi, aal5Lane, and aal5Pnni.
AAL User VC Type
User virtual circuit types. These only apply if the
encapsulation type is aal5Lane. Possibilities are:
boxConfigure, busForward, busSend,
clientConfigure, clientData, clientDirect,
clientDistribute, client Forward,
clientSend, configure, serverConfigure,
serverDirect, and serverDistribute.
Next Leaf IF Index
For a point to point connection this value will be
zero (i.e not used). For a point to multi-point
connection this will be the next leaf VCL’s
interface index on the multicast chain. This value
will be zero, if this is the root VCL and if the value
is zero for a leaf VCL. This also means that this is
the last leaf.
Next Leaf VPI
This value applies only to point to multi-point
connections where this will be the next leaf VCL’s
VPI on the multicast chain.
Next Leaf VCI
This value applies only to point to multi-point
connections where this will be the next leaf VCL’s
VCI on the multicast chain.
Location
Indicates whether the Soft PVC is the called side
or the calling side.
Last Release Cause
Number referencing a Cause Information Element
which indicates the reason for the last software
change.
Atm in Arp Interval
The time interval, in minutes, to send Address
Resolution Protocol (ARP) on a PVC for IP over
ATM.
Cast Type
The VCL cast type. Possible values are point to
point, point to multi-point root, or leaf.