Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 30 Cisco LightStream 1010
Row Status
The status of an entry in the table. Possibilities
are active, notInService, notReady,
createAndGo, createAndWait, and destroy.
Switch Application VCL View
To access this view, double click any entry within
Switch Application VCL Table view. This view
contains the same information as the table with
the exception that the information pertains only
to the selected entry. Also, this view contains the
LightStream Table Extension button which is
described below.
This button opens the Switch Application
Interface Virtual Channel Link Table Extension
View described below.
Switch Application Interface Virtual
Channel Link Table Extension View
Num Attempts
Number of retries made to install this soft virtual
path connection.
Install Time
The time when the VC counter began. This time is
derived from System Up Time.
Slow Retry Interval
Soft Permanent Virtual Connection (SPVC) retry
rate, in seconds.
OAM End Loopback
Enable end-to-end loopback on this virtual table.
OAM AIS Enable
Enables the Alarm Indication Signal (AIS)
function of the Operations, Administration and
Maintenance (OAM) cell generation, if the
connection goes down.
OAM RDI Enable
Enables the Remote Defect Indication (RDI) of the
OAM cell generation, if the connection goes down.
Cross IF Index
For point to point connections, this number is the
index for the cross-connected VPL for this VPL.
For point to multipoint, this will be the root index
VPL or this is the first leaf of a root VPL entry.
Cross VPI
This number specifies the VPI value of the VPL to
which this VPL is connected.
Cross VCI
This number specifies the VCI value of the VPL to
which this VPL is connected.
In Cells
The total number of cells received on this VPL.
LightStream Table Extension