Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 29 Cisco LightStream 1010
IF
The index number associated with this interface.
VPI
The Virtual Channel’s VPI value on this interface.
VCI
The Virtual Channel’s VCI value on this interface.
Admin Status
The value of this object identifies the desired
administrative status of the VCL. Possible states
are up or down indicating that the traffic flow is
enabled or disabled respectively.
Oper Status
The current operational status of the VCL.
Possible states are up, down, and unknown.
Rx Index
The row of the ATM Traffic Descriptor Table
which applies to the receive direction of this VCL.
Xmit Index
The row of the ATM Traffic Descriptor Table
which applies to the transmit direction of this
VCL.
AAL Type
The type of ATM Adaption Layer (AAL) used on
this VCL. Possible values are aal1, aal34, aal5,
other, and unknown.
Xmit Size
The maximum AAL5 Common Part Convergence
Sublayer (CPCS) Service Data Unit (SDU) size, in
octets, that is supported on the transmit direction
of the VCL.
Rx Size
The maximum AAL5 CPCS SDU size, in octets,
that is supported on the receive direction of this
VCL.
Encaps Type
The type of data encapsulation used over the
AAL5 SSCS layer. Possible types are
vcMultiplexRoutedProtocol,
vcMultiplexBridgedProtocol8023,
vcMultiplexed BridgedProtocol8025,
vcMultiplexedBridgedProtocol8026,
vcMultiplexedLANemulation8023,
vcMultiplexLANemulation8025,
llcEncapsulation,
multiprotocolFrameRelaySscs, other, and
unknown.
Cross Connect Id
The connection identifier for a VCL which is
cross-connected to another VCL on the same
VCC.