Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 28 Cisco LightStream 1010
Possible states are up or down indicating that the
traffic flow is enabled or disabled respectively.
Row Status
The status of an entry in the table. Possibilities
are active, notInService, notReady,
createAndGo, createAndWait, and destroy.
Switch Application Virtual Path Cross
Connect View
This view contains the same information as the
Switch Application Virtual Path Cross Connect
Table view, with the exception that it pertains
only to the table entry selected. Also, this view
contains the following information:
L2H Op Status
This value identifies the current operational
status of the VP cross-connection in one direction
(i.e., from low to high).
H2L Op Status
The value of this object identifies the current
operational status of the VP cross-connection in
one direction (i.e., from high to low).
L2H Last Change
This value is the same as the MIB II’s System Up
Time at the time the VP cross-connect became
active in a low to high direction.
H2L Last Change
This value is the same as the MIB II’s System Up
Time at the time the VP cross-connect became
active in a high to low direction.
Link Table View
This Icon Subviews menu selection contains the
following sub selections which contain
information about all virtual channel and path
cross links, in addition these views contain a Row
Status Procedure, which enables you to create a
new link or remove an existing one.
Row Status Procedure
1 Set Link Information: Enter the requested
information for this connection in the box
labeled Link Information, then press return.
a Click OK in the Save Changes dialog box.
2 Click either the Create Link button or the
Remove Link Button.
Switch Application VCL Table View
In addition to the following information, this table
also provides double-click access to the Switch
Application Virtual Channel Link View, which
contains the same information as the table view
with the exception that it pertains only to the
entry clicked on.