Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 27 Cisco LightStream 1010
Row Status
The status of an entry in the table. Possibilities
are active, notInService, notReady,
createAndGo, createAndWait, and destroy.
Switch Application Virtual Channel
Cross Connect View
This view contains the same information as the
Switch Application Virtual Channel Cross
Connect Table view, except it applies only to a
single entry within the table. Also, this view
contains the following information:
L2H Op Status
This value identifies the current operational
status of the VC cross-connection in one direction
(i.e., from low to high).
H2L Op Status
The value of this object identifies the current
operational status of the VC cross-connection in
one direction (i.e., from high to low).
L2H Last Change
This value is the same as the MIB II’s System Up
Time at the time the VC cross-connect became
active in a low to high direction.
H2L Last Change
This value is the same as the MIB II’s System Up
Time at the time the VC cross-connect became
active in a high to low direction.
Switch Application Virtual Path Cross
Connect Table View
This view contains the following information:
Index
A unique value used to identify this VC cross-
connect.
Low Index
The value of this object is equal to the index value
of the ATM interface port for this VC cross-
connect.
Low VPI
The value of this object is equal to the VPI value
at the ATM interface associated with this VC
cross-connect.
High VPI
The value of this object is equal to the VPI value
at the ATM interface associated with the VC
cross-connect High IF, defined above.
Admin Status
The value of this object identifies the desired
administrative status of the VC cross-connect.