Specifications

Application Views Switching Application (LS_Switch_App)
Device Management Page 26 Cisco LightStream 1010
you to create a new connection or remove an
existing one.
Row Status Procedure
1 Click the Index button to select an index
value. This will display AVC Cross Connect
Index dialog box which will provide an index.
2 Set Connection Information: Enter the
requested information for this connection in
the box labeled Connection Information, then
press return.
a Click OK in the Save Changes dialog box.
3 Click either the Create Connection button or
the Remove Connection Button.
Switch Application Virtual Channel
Cross Connect Table View
In addition to the following information, this table
also provides double-click access to the Switch
Application Virtual Channel Cross Connect View.
Index
A unique value used to identify this VC cross-
connect.
Low IF
The value of this object is equal to the index value
of the ATM interface port for this VC cross-
connect.
Low VPI
The value of this object is equal to the VPI value
at the ATM interface associated with this VC
cross-connect.
Low VCI
The value of this object is equal to the VCI value
at the ATM interface associated with this VC
cross-connect.
High IF
The value of this object is equal to the index value
for the ATM interface port for this VC cross-
connect.
High VPI
The value of this object is equal to the VPI value
at the ATM interface associated with the VC
cross-connect High Index, defined above.
High VCI
The value of this object is equal to the VCI value
at the ATM interface associated with the VC
cross-connect High Index, defined above.
Admin Status
The value of this object identifies the desired
administrative status of the VC cross-connect.
Possible states are up or down indicating that the
traffic flow is enabled or disabled respectively.