Specifications

Application Views Supported Applications
Device Management Page 22 Cisco LightStream 1010
Supported Applications
SPECTRUM’s applications can be grouped within
two general categories as follows:
• Applications associated with non proprietary
MIBs. See Common Applications below.
• Applications associated with device-specific
MIBs. See Device-Specific MIBs (Page 23).
Common Applications
For the most part, these applications represent
the non proprietary MIBs supported by devices.
Listed below (beneath the title of the SPECTRUM
document that describes them) are some of the
common applications currently supported by
SPECTRUM. Refer to these documents when your
devices support these applications.
• Routing Applications
- Generic Routing
- Repeater
- AppleTalk
- DECnet
- OSPF
- OSPF2
- BGP4
- VRRP
• Bridging Applications
- Ethernet Special Database
- Spanning Tree
- Static
- Transparent
- PPP Bridging
- Source Routing
- Translation
- QBridge
• MIB II Applications
- SNMP
-IP
- ICMP
- TCP
- System2
- UDP
• Transmission Applications
- FDDI
- Point to Point
- DS1
- DS3
- RS-232
Note:
Note:
The documents listed below (in bold
font) are available for viewing at:
www.aprisma.com/manuals/