Specifications

Device View Interface Icon Subviews Menu
Device Management Page 19 Cisco LightStream 1010
Cast Type
The VCL cast type, its possible values are: point
to point, point to multi-point root, and
point to multi-point leaf.
Span Type
The VCL span types which can be either a transit
connection or a terminating one. If it is a transit
connection, then it is passed on, if it is a
terminating connection, then it ends there.
Config Type
The VCL configuration types. Possible values are:
permanent, switch, soft, and other.
In Cells
The total number of cells received on the selected
VCL.
Out Cells
The total number of cells transmitted on the
selected VCL.
Virtual Paths
Opens the IF Virtual Path Link Table view which
contains the same information as the IF Virtual
Channel Link Table view described on page -18.
Interface Threshold View
The Interface Threshold View provides the
following information:
Load Threshold
The ON and OFF values are set to determine the
point at which a load alarm will be turned on or
off.
Packet Rate Threshold
The ON and OFF values are set to determine the
point at which a packet transmission alarm will
be turned on or off.
Error Rate Threshold
The ON and OFF values are set to determine the
point at which an error alarm will be turned on or
off.
% Discarded Threshold
The ON and OFF values are set to determine the
point at which a discarded threshold alarm will
be turned on or off.