Specifications

Device View Interface Icon Subviews Menu
Device Management Page 18 Cisco LightStream 1010
VPI Value
The SVC’s Virtual Path Identifier (VPI) value, on
this interface.
VCI Value
The SVC’s Virtual Channel Identifier (VCI) value,
on this interface.
SVC Direction
This value indicates whether the selected Virtual
Channel Link (VCL) is the calling side, the side
that has been called, the root side or the leaf for
this address. Possible values are listed in Table 5.
SVP Addresses
The Switched Virtual Path (SVP) Address Table
view, provides the following information:
SVP Address
The address of the switched virtual path,
depending upon whether the paths direction is:
p2pCallingSide, p2pCalledSide, p2mpRoot or
p2mpLeaf.
SVP’s VPI
The Switched Virtual Path’s (SVP) VPI value on
this interface.
SVP Direction
This value indicates whether the SVP is on the
calling side, the called side, the root side or the
leaf side. Table 5 lists the possible values.
Links
This subview menu selection contains two sub-
selections; Virtual Channels and Virtual Paths.
Virtual Channels
Opens the IF Virtual Channel Link Table view
which provides the following information on the
switch’s VCLs. In addition, double-clicking any
entry in this table will open the ATM IF Virtual
Channel Link View.
VPI
The SVC’s VPI value on this interface.
VCI
The SVC’s VCI value on this interface.
Table 5: SVC & SVP Direction Values
Value Description
p2pCallingSide Point to point calling side.
p2pCalledSide Point to point called side.
p2mpRoot Point to multi-point root.
p2mpLeaf Point to multi-point leaf.