Specifications

Device View Interface Icon Subviews Menu
Device Management Page 17 Cisco LightStream 1010
If Index
The index number identifying the port to which it
is attached.
Status
The current status of the interface. The value of
this object is only valid when the interface’s
Administrative Status is set to “up”. Possible
values are los, lof, loc, ais, yellowLine,
yellowPath, lop, idle, yellowAlarm, plcpLOF,
plcpYellow, maFERF, pathAis, and ocd.
Plcp Bip Violations
The number of Physical Layer Convergence
Protocol (PLCP) BIP violations on the physical
interface. This object is only present for DS3/E3
interfaces.
Section Parity Errors
The number of section parity errors on the
physical interface.This object is only present for
SONET interfaces.
LCV Errors
The number of Line Code Violation (LCV) errors
on the physical interface. This object is only
present for DS3/E3 interfaces.
C Bit Parity Errors
The number of C-bit parity violations on the
physical interface. This object is only present for
DS3/E3 interfaces.
Path Parity Errors
The number of B3 (BIP) errors on the physical
interface. This object is only present for SONET
interfaces.
P Bit Parity Errors
The number of P-bit parity violations on the
physical interface. This object is only present for
DS3/E3 interfaces.
Connections
This Subview menu selection contains two sub-
selections; SVC Addresses and SVP Addresses.
SVC Addresses
The Switched Virtual Channel (SVC) Address
Table view provides the following information:
IF Index
The index number identifying the interface to
which it is attached.
SVC Addresses
The SVC address. This depends on the direction
the interface is in. Possible values are: p2pcalling
(point to point calling), p2pcalled (point to point
called), p2mproot (point to multi-point root), and
p2mpleaf (point to multi-point leaf).