Specifications

Device View Interface Icon Subviews Menu
Device Management Page 16 Cisco LightStream 1010
Interface Icon Subviews Menu
Table 4 describes the Interface icon device-
specific Subviews menu selections.
Interface Icon Subviews Menu
Selections
Interface Physical Error View
The Interface Physical Error View provides the
following error information on a specific interface:
Note:
Note:
Some of the interface Icon Subviews
menu selections may be grayed out
for all of the interface types except
atm because they are not applicable
to those interface types.
Table 4: Interface Icon Subviews Menu
Menu Selection Description
Detail Opens the Interface Detail view,
described in the SPECTRUM Views
documentation.
IF Status Opens the Interface Status View
(Page 11).
IF Physical Opens the Interface Physical Error
View (Page 16).
Resource
Management
Opens the Switch Resource
Management Configuration View
(Page 67)
Connections Contains two sub menu selections;
SVC Addresses, and SVP
Addresses, described in this
chapter.
Links Contains two sub menu selections;
Virtual Channels, described in this
chapter, and Virtual paths, also
described in this chapter.
IF Configuration Opens the Interface Configuration
View, described in Configuration
Views (Page 56).
IF Address
Translation
Table
Opens the Interface Address
Translation Table View (Page 15).
Secondary
Address Panel
Opens the Network Information
Panel View, described on page ?.
Thresholds Opens the Interface Threshold View
(Page 19).
Model
Information
Opens the Model Information View,
described in the SPECTRUM Views
documentation.
Table 4: Interface Icon Subviews Menu