Datasheet

Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 3
Product Specifications
Table 2 lists the product specifications for the Cisco LCD 110Q PRO 55.
Table 2. Cisco LCD 110Q PRO 55 Product Specifications
Feature Specification
Diagonal size 55 in.
Native resolution 1920 x 1080 (HDMI)
Resolutions supported 1080p, 1080i, and 720p
Brightness (typical) 700 cd/m2
Contrast ratio (typical) 1300:1
Viewing angle (Horizontal/Vertical) 178/178 degrees
Response time 10 ms
Pixel pitch 0.630 x 0.630
Horizontal frequency 15.625/15.734/31.5 ~ 91.1kHz (RGB, HDMI/DVI)
Vertical frequency 50.0/58.0 ~ 85.0 Hz (RGB, HDMI/DVI)
Inputs HDMI, DVI, RGB, Composite, S-Video, and Component
Speaker 5W x 2
Power consumption (maximum) ~304W
Power consumption at standby
(maximum)
1W (RGB)/2W (HDMI/DVI)
Power supply 100~240V, 50/60Hz
VESA mount 400 x 400mm
Weight (set/package) 82.9lb/103.6lb (37.6kg/47.0kg)
Dimensions (H x W x D) 49.30 x 28.46 x 5.12 in. (125.21 x 72.29 x 13.01 cm)
Bezel width 19.5 mm
Operating temperature 0-40°C
Humidity 10-80%
Mean time between failure (MTBF) 50,000 hours
Built-in TV tuner No
Special features
●
Lamp error detection
●
Temperature sensor
●
Built-in fan
●
Tile Mode (5x5)
●
RS-232C
●
Energy Star 5.0
Table 3 lists regulatory and compliance specifications for the Cisco LCD 110Q PRO 55, in accordance with
Commission Regulation (EC) 642/2009.
Table 3. Cisco LCD 110Q PRO 55 Regulatory and Compliance Specifications
Parameter Specification
Lab tested on-mode power consumption 227.8W
Lab tested standby mode power
consumption
0.83W
Lab tested off-mode power consumption 0W
Forced menu NA
Peak luminance
1
65.66%
Mercury content 77.0mg
Lead content
2
Yes