Specifications

70
Channelized and Electrical Interface Line Card Installation and Configuration
78-16417-02
Line Card Memory
Note Some line cards do not require a retaining clip.
Figure 26 SODIMM Socket Retaining Clip
Caution If the retaining clip is damaged, do not use it. This can damage the SODIMM socket.
Step 4 Locate the route memory socket on the line card.
Step 5 Remove the new SODIMM from its protective antistatic bag.
Caution Grasp the edges of the SODIMM only. Do not touch the integrated circuit devices on the SODIMM, the
metal traces, or fingers, along the edge of the SODIMM, or the pins in the SODIMM socket.
Step 6 Line up the SODIMM key with the key in the board socket. (See Figure 27.)
Figure 27 SODIMM with Key in Face-Up Position
75757
75759