Specifications

Channelized and Electrical Interface Line Card Installation and Configuration

78-16417-02

Line Card Memory

Figure 24 Moving the Plastic Latch Away from the SODIMM

Step 6

As the SODIMM is released, it positions itself at a 45-degree angle. Gently pull the SODIMM module

out of the socket. Continue to keep the module at a 45-degree angle until it is completely removed from

the socket guides. (See Figure 25b.)

Figure 25 Removing a 144-pin SODIMM Module

Step 7

Immediately place the SODIMM in an antistatic bag to protect it from ESD damage.

Installing a SODIMM

To install a SODIMM module, follow these steps:

Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.

Step 2 Place the line card on an antistatic mat so that the faceplate is nearest to you.

Step 3 If there is a retaining clip, check to make sure that it has not been damaged or bent. (See Figure 26.)

75799

75780