Specifications

5
Channelized and Electrical Interface Line Card Installation and Configuration
78-16417-02
Product Overview
Line Card Memory Options
The channelized and electrical interface line card memory options vary by line card. See the “Line Card
Memory” section on page 63 for more information.
Related Documentation
This publication describes the basic installation and initial configuration of a channelized and electrical
interface line card. For complete configuration information, refer to the following publications:
• Cisco IOS Software Configuration for the Cisco 12000 Series 1-Port Channelized OC-12c/STM-4
(DS1/E1) Line Card
• Installation and Configuration Guide for your router
• Software Configuration Guide for the Cisco 12000 Series Internet Router
• Cisco IOS Configuration Fundamentals Configuration Guide
• Cisco IOS Configuration Fundamentals Command Reference
• Cisco IOS Release 12.0S Release Notes for Cisco 12000 Series Internet Routers
• Field Diagnostics for the Cisco 12000 Series Internet Router
• Regulatory Compliance and Safety Information for Cisco 12000 Series Internet Routers
See the “Obtaining Documentation” section on page 78 for information on how to obtain these
publications.
Product Overview
This section includes product overview information for each channelized and electrical interface line
card:
• 1-Port Channelized OC-12/STM-4 (DS1/E1) ISE Line Card Product Overview, page 5
• 1-Port Channelized OC-48/STM-16 ISE Line Card Product Overview, page 6
• 4-Port Channelized OC-12/STM-4 ISE Line Card Product Overview, page 7
• 1-Port Channelized OC-12/STM-4 (OC-3) Line Card Product Overview, page 7
• 1-Port Channelized OC-12/STM-4 (DS3) Line Card Product Overview, page 8
• 2-Port Channelized OC-3/STM-1 (DS1/E1) Line Card Product Overview, page 9
• 6-Port Channelized T3 (T1) Line Card Product Overview, page 9
• 6-Port and 12-Port DS3 Electrical Interface Line Card Product Overview, page 10
• 6-Port and 12-Port E3 Electrical Interface Line Card Product Overview, page 11
1-Port Channelized OC-12/STM-4 (DS1/E1) ISE Line Card Product Overview
The 1-port channelized OC-12/STM-4 (DS1/E1) ISE line card provides Cisco 12000 Series Routers with
a single OC-12c/STM-4c to DS1/E1 full-duplex, single-mode, intermediate-reach interface. Figure 1
shows the front view of this line card.