Specifications

18
Channelized and Electrical Interface Line Card Installation and Configuration
78-16417-02
Line Card Cable-Management Bracket
Cisco 12000 Series Routers include a cable-management system that organizes the interface cables
entering and exiting the router, keeping them out of the way and free of sharp bends.
Caution Excessive bending of interface cables can damage the cables.
The cable-management system consists of two separate components:
1. A cable-management tray that is mounted on the chassis. Refer to the appropriate Cisco 12000
Series Router installation and configuration guide for more information on the cable-management
tray.
2. A cable-management bracket that attaches to a line card.
This section describes the line card cable-management bracket. Figure 12 shows the single-port line card
cable-management bracket; Figure 13 shows the multiport line card cable-management bracket.
Figure 12 Single-Port Line Card Cable-Management Bracket
93237