User guide

Help Contents > Configuring the ISDN gateway > Shutting down the ISDN gateway

Shutting Down the ISDN gateway

It is sometimes necessary to shut down the ISDN gateway, generally to restart as part of an upgrade (see Upgrading the

Firmware). You should also shut down the ISDN gateway before intentionally removing power from the ISDN gateway.

Shutting down the ISDN gateway will disconnect all active calls.

To shut down the ISDN gateway, follow these steps:

1. Go to Home > Settings > Shutdown.

2. Click the Shutdown ISDN gateway button.

3. Confirmation of shutdown is required; the button changes to Confirm ISDN gateway shutdown.

4. Click again to confirm.

5. The ISDN gateway will begin to shut down. The banner at the top of the page will change to indicate this.

6. When the shutdown is complete, the button will change to Restart ISDN gateway.

7. Click this button a final time to restart the ISDN gateway