User guide

Help Contents > Configuring the ISDN gateway > Configuring IP services settings

Configuring IP Services Settings

The Codian ISDN gateway offers a range of IP-based services, such as the web interface, FTP access for managing

configuration, and H.323 for making and receiving calls. Depending on the security requirements of your network, it is

possible to control which services may be accessed on Ethernet ports A and B, and optionally change the TCP (or UDP)

ports they may be accessed on.

To configure the IP services settings go to Home > Settings > Services.

NOTE: Port B cannot be enabled on the Codian ISDN gateway

Field Field Description Usage Tips

Web

Use this option to enable or disable web access

on the appropriate port.

Web access is required to view and change the

ISDN gateway web pages and read online help

files. If you disable web access on both Ports A

and B, you will need to use the serial console

interface to re-enable it.

If a port is disabled, this option will be

unavailable.

Incoming

H.323

Use this option to allow or reject incoming calls

to the ISDN gateway using H.323.

Disabling this option will not prevent outgoing

calls to H.323 devices being made by the ISDN

gateway .

If a port is disabled, this option will be

unavailable.

FTP

Use this option to enable or disable FTP access

on the appropriate port.

You should consider disabling FTP access on any

port that is outside your organization's firewall.

If a port is disabled, this option will be

unavailable.