User guide

Help Contents > Displaying Call and ISDN Information > Displaying Detailed Call Information

Displaying Detailed Call Information

Active calls are listed with some details in the ISDN Calls List (see Displaying the ISDN Calls List). To view further details

about an active call, go to ISDN > ISDN Calls and click more for the call about which you want more information.

On the Call details page, the call for which more details are provided, is displayed with a number (example: "Call 15

details"). This number is generated by the ISDN gateway (numerically, starting from zero since the last reboot) for the

purposes of internal identification.

Field Field Description

Started at

For IP to ISDN calls, this is the time that the call was received by the ISDN gateway.

For ISDN to IP calls this is the time that all the channels comprising the call have connected

and bonded.

Call progress

The status of the call, which will be one of:

● Initial: an IP or ISDN call has just come in, and the ISDN gateway is determining if

it is allowed and where to direct it.

● Calling out: the ISDN gateway is trying to make contact with the other side of the

call.

● Connected: the call is in progress between and IP and and ISDN endpoint.

● Dying: You might notice this state briefly as a call is terminated, either by one of

the participants or via the web interface.

Call progress also lists the caller's number and the number that was called and the

destination, including IP address for an IP destination.

Participant details

Name

The name the caller provided when the call was initiated.

E.164

The telephone number of the participant.

Call type

The participant's call type: either H.320 (ISDN caller) or H.323 (IP caller).

FECC

Whether Far-End Camera Control has been established or not.

Progress

The status of the participant's side of the call, which will be one of:

● Initial: the call is just starting.

● Proceeding: trying to make contact with the other side of the call.

● Alerting: the other side of the call is ringing (you might not see this state).

● Connected: the call is in progress.

● Disconnecting: the call is in the process of going down.

● Finished: the call is disconnected (you might not see this state).

Channel bonding

map

Only for ISDN participants: The numbers of the ISDN channels that are in use for this call.