Specifications

Configuring Routing Between VLANs
Configuration Examples for Configuring Routing Between VLANs
59
VLAN 70 Configuration
ipx routing
interface FastEthernet 3/0
no shutdown
interface Fast3/0.70
encapsulation isl 70
ipx network 70 encapsulation novell-ether
IPX Routing on FDDI Interfaces with SDE: Example
The following example enables IPX routing on FDDI interfaces 0.2 and 0.3 with SDE. On FDDI
interface 0.2, the encapsulation type is SNAP. On FDDI interface 0.3, the encapsulation type is Novell’s
FDDI_RAW.
ipx routing
interface fddi 0.2 enc sde 2
ipx network f02 encapsulation snap
interface fddi 0.3 enc sde 3
ipx network f03 encapsulation novell-fddi
Routing with RIF Between a TRISL VLAN and a Token Ring Interface: Example
Figure 89 shows routing with RIF between a TRISL VLAN and a Token Ring interface.
Figure 89 Routing with RIF Between a TRISL VLAN and a Token Ring Interface
The following is the configuration for the router:
source-bridge ring-group 100
!
interface TokenRing 3/1
ip address 10.4.4.1 255.255.255.0
!
interface FastEthernet4/0.1
ip address 10.5.5.1 255.255.255.0
encapsulation tr-isl trbrf 999 bridge-num 14
multiring trcrf-vlan 200 ring-group 100
multiring all
10777
Fast Ethernet 4/0.1
5.5.5.1
4.4.4.1
100
Catalyst 5000 switch
5500
Token Ring
switch
module
TrCRF VLAN 40
Slot 5
Port 1
TrBRF 999 / Bridge 14
TrCRF 200
End station
Token
Ring 1
End station
End station
End station
Token
Ring 2