Specifications

Configuring Routing Between VLANs
Configuration Examples for Configuring Routing Between VLANs
56
!
end
!
Router B Configuration
interface FastEthernet 1/1.110
encapsulation isl 110
ip address 10.1.1.3 255.255.255.0
standby 1 ip 10.1.1.101
standby 1 preempt
standby 2 ip 10.1.1.102
standby 2 preempt
standby 2 priority 105
router igrp 1
!
network 10.1.0.0
network 10.2.0.0
!
VLAN Switch Configuration
set vlan 110 5/4
set vlan 110 5/3
set trunk 2/8 110
set trunk 2/9 110
IP Routing with RIF Between TrBRF VLANs: Example
Figure 86 shows IP routing with RIF between two TrBRF VLANs.
Figure 86 IP Routing with RIF Between TrBRF VLANs
The following is the configuration for the router:
interface FastEthernet4/0.1
ip address 10.5.5.1 255.255.255.0
encapsulation tr-isl trbrf-vlan 999 bridge-num 14
multiring trcrf-vlan 200 ring 100
multiring all
!
Catalyst
5000 switch
5500
11250
End station
Token
Ring
103
End station
TrBRF 998 / Bridge 13
TrBRF 999 / Bridge 14
Router
101
100
Token
Ring
102
Fast Ethernet 4/0.1
Fast Ethernet 4/0.2
Token Ring
switch
module
5.5.5.1
4.4.4.1
TrCRF VLAN 40
Slot 5
Port 1
TrCRF
VLAN 50
Slot 5
Port 2
TrCRF 300
TrCRF 200