Specifications

Configuring Routing Between VLANs
How to Configure Routing Between VLANS
33
Note For more information on configuring AppleTalk, see the “Configuring AppleTalk” chapter in the Cisco
IOS AppleTalk and Novell IPX Configuration Guide.
Step 6
appletalk zone zone-name
Example:
Router(config-if)# appletalk zone eng
Assigns the AppleTalk zone for the subinterface.
Step 7
encapsulation sde said
Example:
Router(config-if)# encapsulation sde 100
Defines the encapsulation format as IEEE 802.10 (sde) and
specifies the VLAN identifier or security association
identifier, respectively.
Command or Action Purpose